RH302 RHCE (Redhat Certified Engineer) Questions and Answers

The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk partitions (or possibly RAID arrays) are set up in a bunch of equal-sized chunks known as Physical Extents (PE). As there are several other concepts associated with the LVM system, let's start with some basic definitions:

Physical Volume (PV)is the standard partition that you add to the LVM mix. Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.

Physical Extent (PE)is a chunk of disk space. Every PV is divided into a number of equal sized PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.

Logical Extent (LE)is also a chunk of disk space. Every LE is mapped to a specific PE.

Logical Volume (LV)is composed of a group of LEs. You can mount a filesystem such as /home and /var on an LV.

Volume Group (VG)is composed of a group of LVs. It is the organizational group for LVM. Most of the commands that you'll use apply to a specific VG.

1.Verify the size of Logical Volume:lvdisplay /dev/vg0/lv1

2.Verify the Size on mounted directory:df –h or df –h mounted directory name

3.Use :lvextend –L+400M /dev/vg0/lv1

4. resize2fs /dev/vg0/lv1to bring extended size online.

5. Again Verify using lvdisplay and df –h command.

Do the following steps as:

1.vi /etc/sysconfig/network

GATEWAY=192.168.0.254

OR

vi /etc/sysconf/network-scripts/ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

ONBOOT=yes

IPADDR=192.168.0.?

NETMASK=255.255.255.0

GATEWAY=192.168.0.254

2.service network restart

This is boot related problem. There will be same questions repeated two times but problem is different.

First When you restart the system you will get the Error:

mount: error 15 mounting ext3

mount: error 2 mounting none

switchroot: mount failed: 22

umount /initrd/dev/: 2

Kernel Panic: no syncing: Attempted to kill init !

This error occurred in your system before showing welcome redhat linux. That means problem in grub boot loader.

Restart the System

Check the grub boot loader configuration by pressing e shortcut key.

You will see like:

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root= / rhgb quiet

initrd /initrd-2.6.9-5.EL.img

OR

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/root rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Then Edit Boot loader to make like

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Check all lines and edit as same as above. Press b to boot the system

After booting the system you should correct the /etc/grub.conf file.

Do the following steps as:

vi /etc/resolv.conf

nameserver 172.24.254.254

host server1.example.com

Do the following steps as:

1.vi /etc/hosts.deny

dovecot:ALL EXCEPT .example.com EXCEPT station20.example.com

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

-Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation. Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address.

Document directive is used in apache configuration file to specify the directory where all web site related documents are. According to question eric user should able to write into the Document root directory.

Better set the permission using ACL (Access Control List), to apply the permission using acl needs to mount the filesystem with acl options. Example in above answer documentroot is in /var and /var is mounting separate file system so needs to mount the /var file system with acl option.

vi /etc/fstab

LABEL=/var/varext3defaults 1 1

mount –o remount /var

setfacl –m u:eric:rwx /var/www/example

getfacl /var/www/example

getfacl and setfacl two commands used to maintain the permission through acl. setfacl is used to set the permission on file/directory, getfacl is used to display the permission of file/directory.

Do the following steps as:

1.vi /etc/squid/squid.conf

#detault:

http_port8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 192.168.0.0/255.255.255.0

acl msnnet dstdomain .msn.com

#Default:

# http_access deny all

#Under Herehttp_access deny msnnet

http_access allow allownet

2.service squid start

3.chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

To block or allow the Internet access to hosts, we should create the acl (Access Control List). In this file we can specify only the IP address.

Example: acl aclname src IP/NetmaskAfter creating acl we can block or allow the Internet to specified acl.

http_access allow | deny alcname

Do the following steps as:

1.vi /etc/hosts.deny

sshd:ALL EXCEPT .example.com

or

1.vi /etc/hosts.deny

sshd:ALL

2.vi /etc/hosts.allow

sshd:.example.com

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

- Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation. Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address.

Do the following steps as:

1.vi /etc/security/limits.conf

user1hardnproc7

2.vi /etc/pam.d/system-auth

sessionrequired/lib/security/pam_limits.so

To limit the number of process or number of logins, we should configure on /etc/security/limits.conf. First Columns contains the username separated by comma or @group name. Second column either hard or soft limits. Third columns called the item, maxloigns or nproc etc.

To identify the session of users we should call the pam_limits module in /etc/pam.d/system-auth.

Do the following steps as:

1.vi /etc/httpd/conf/httpd.conf

<VirtualHost 192.100.0.1>

ServerNamewww.abc.com

DocumentRoot /var/www/abc/

<Directory /var/www/abc>

Order Allow, Deny

Allow from .example.com

</Directory>

DirectoryIndexindex.html

ServerAdminwebmaster@abc.com

ErrorLog logs/error_abc.logs

CustomLog logs/custom_abc.logs common

</VirtualHost>

2.Create the directory and index page on specified path. (Index page can download fromftp://server1.example.comat exam time)

3.service httpd start|restart

4.chkconfig httpd on

Order allow, denyAllows explicitly allowed clients, denies everyone else; clients matched by both allow and deny are denied.

Order deny, allowdenies explicitly denied clients, allows everyone else, clients matched by both allow and deny are allowed.

Outside the LAN means cracker.org. All host on exam on example.com domain and outside domain means cracker.org.

To block the mail coming from cracker.org

1.vi /etc/mail/access

@cracker.rogREJECT

2.service sendmail start | restart

3.chkconfig sendmail on

Do the following steps as:

1.vi /etc/named.conf

acl localnet { 192.168.0.0/24; };

options {

allow-query { localnet; };

};

2.service named restart | start

allow-query is a global option on /etc/named.conf, specifies an address match list of hosts allowed to query this server. If this option is not set, any host can query the server.

Do the following steps as:

1.vi /etc/mail/local-host-names

example.com

2.vi /etc/mail/sendmail.mc

dnl # DEAMON_OPTIONS(`Port=smtp,Addr=127.0.0.1,Name=MTA`)dnl

3.m4 /etc/mail/sendmail.mc >/etc/mail/sendmail.cf

4.vi /etc/mail/access

RELAY

example.comRELAY

5.service sendmail start | restart

6.chkconfig dovecot on

7.vi /etc/dovecot.conf

protocols = pop3 pop3s

8.service dovecot start | restart

9.chkconfig dovecot on

/etc/mail/local-host-names file contains the aliases to hostname. Mail server program reads the /etc/mail/sendmail.cf. To change the configuration on mail server, we should edit the /etc/mail/sendmail.mc file and should generate the sendmail.cf using m4 command.

By default sendmail server allows to connect to local host only. So we should edit the /etc/mail/sendmail.mc file to allow connect to other hosts.

By default sendmail server will not forward mail. we should specify on /etc/mail/access to relay or to block mail coming from domain or network or individual email address.

By default dovecot service start only the imap protocol. To start pop protocol with dovecot, we should write in /etc/dovecot.conf file.

Do the following steps as:

1.vi /etc/xinetd.d/telnet

service telnet {

only_from=192.168.0.0/24

access_times=09:00-17:00

}

2.chkconf telnet on

3.service xinetd restart

xinetd based services can manage by specifying host and time parameters. Only_from means connection allowed network, remaining hosts explicitly deny. access_times specify when service is available.

Do the following steps as:

1.vi /etc/vsftpd.ftpusers

user1

user2

2.service vsftpd start| restart

Using /etc/vsftpd.ftpusers file we can deny to certain users to access files via ftp. As well as there is another file named /etc/vsftpd.user_list can be used to allow or to deny to users.

Do the following steps as:

1.vi /etc/squid/squid.conf

#detault:

http_port8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 192.168.0.0/255.255.255.0

acl denynet src 192.168.1.0/255.255.255.0

#Default:

# http_access deny all

#Under Herehttp_access allow allownet

http_access deny denynet

2.service squid start

3.chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

To block or allow the Internet access to hosts, we should create the acl (Access Control List). In this file we can specify only the IP address.

Example: acl aclname src IP/NetmaskAfter creating acl we can block or allow the internet to specified acl.

http_access allow | deny alcname

Do the following steps as:

1.vi /etc/samba/smb.conf

[global]

netbios name=station?

workgroup=station?

security=user

smb passwd file=/etc/samba/smbpasswd

encrypt passwords=yes

hosts allow= .example.com

[data]

path=/data

public=no

writable=no

browsable=yes

2.smbpasswd -a eric

3.service smb start

4.chkconfig smb on

/etc/samba/smb.conf. There are some pre-defined section, i. globaluse to define the global options, ii. Printersuse to share the printers, iii. homesuse the share the user’s home directory.

Security=uservalidation by samba username and password. May be there are other users also. To allow certain share to certain user we should use valid users option.

smbpasswdHelps to change user’s smb password. –a option specifies that the username following should be added to the local smbpasswd file.

Do the following steps as:

Use fdisk /dev/hdaTo create new partition.

Type nFor New partitions

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name.

Press w to write on partitions table.

Either Reboot or use partprobe command.

Use mkfs –t ext3 /dev/hda? Where ? is your partition number

Or

mke2fs –j /dev/hda? To create ext3 filesystem.

mkdir /mnt/neo

vi /etc/fstab

Write:

/dev/hda?/mnt/neoext3defaults1 2

Verify by mounting on current Sessions also:

mount /dev/hda? /mnt/neo

Do the following steps as:

echo “1” >/proc/sys/net/ipv4/ip_forward

vi /etc/sysctl.conf

net.ipv4.ip_forward=1

/proc is the virtual filesystem, containing the information about the running kernel. To change the parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the value from /etc/sysctl.conf.

chown or chgrp command is used to change the ownership.

Syntax of chown: chown [-R] username:groupname file/directory

Syntax of chgrp: chgrp [-R] groupname file/directory

Whenever user creates the file or directory, the owner of that file/directory automatically will be that user and that user’s primary group name.

To change group owner ship

chgrp training /data Which set the Group Ownership to training

or

chown root.training /dataWhich set the user owner to root and group owner to training group.

Verify /data using: ls -ld /data

You will get: drwxr-xr-x 2 root training …………..

Do the following steps as:

1.useradd jane

2.useradd john

useradd command is used to create the user. All user’s information stores in /etc/passwd and user;s shadow password stores in /etc/shadow.

Do the following steps as:

Steps of Creating LVM:

Physical Disk1

Physical Disk2

Physical Disk3

Physical Volume

Volume Group

Logical Volume 1

Logical Volume 2

Logical Volume 3

1.pvcreate /dev/hda8 /dev/hda9 /dev/hda10

pvdisplay command is used to display the information of physical volume.

2.vgceate test0 /dev/hda8 /dev/hda9 /dev/hda10

vgdisplay command is used to display the information of Volume Group.

3.lvcreate –L 250M –n testvolume1 test0

lvdisplay command is used to display the information of Logical Volume.

4.lvcreate –L 250M –n testvolume2 test0

5.mkfs –t ext3 /dev/test0/testvolume1

6.mkfs –t ext3 /dev/test0/testvolume2

7.mkdir /lvtest1

8.mkdir /lvtest2

9.mount /dev/test0/testvolume1 /lvtest1

10.mount /dev/test0/testvolume2 /lvtest2

11.vi /etc/fstab

/dev/test0/testvolume2/lvtest2ext3defaults0 0

/dev/test0/testvolume1/lvtest1ext3defaults0 0

To create the LVM( Logical Volume Manager) we required the disks having ‘8e’ Linux LVM type. First we should create the physical Volume, then we can create the Volume group from disks belongs to physical Volume. lvcreate command is used to create the logical volume on volume group. We can specify the size of logical volume with –L option and name with -n option.

Do the following steps as:

1.chmod g+s /archive

2.Verify using: ls -ld /archive

Permission should be like:

drwxrws--- 2 root sysuser 4096 Mar 16 18:08 /archive

If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory.

To set the SGID bit: chmod g+s directory

To Remove the SGID bit: chmod g-s directory

Note: Examiner will provide you the Installation startup CD. And size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 192.168.0.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

When user creates the file/directory, user owner will be user itself and group owner will be the primary group of the user.

There is one Special Permission SGID bit, when you set the SGID bit on directory,When users creates the file/directory automatically owner group will be same as a parent directory.

chmod g+s /data

Verify using: ls -ld /data

You will get: drwxrws---

Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the Language, keyboard selection.

4. It will ask you for the installation method.

5. Select the HTTP from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the Web site name and Redhat Enterprise Linux Directory.

Specify the HTTP Server: 192.168.0.254

Directory: rhel4Because Default Directory for http is /var/www/html

8. After Connecting to the HTTP Server Installation start. Go upto the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should be

care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

1.dump -0u –f /tmp/back /dev/hda4

dump is the standard backup utility. According to the questions, fullback should take. –0 means fullback, -u means update the /etc/dumpdates which maintains the backup record and -f means filename. If you are directly taking backup into other device, you can specify the device name.

e dump -0u -f /dev/st0 /dev/hda4. Where hda4 is a separate partition mounted on /home.

Do the following steps as:

1.usermod -G sysuser jackie

2.usermod –G sysuser curtin

3.Verify by reading /etc/group file

Using usermod command we can make user belongs to different group. There are two types of group one primary and another is secondary. Primary group can be only one but user can belongs to more than one group as secondary.

usermod -g groupname usernameTo change the primary group of the user

usermod -G groupname usernameTo make user belongs to secondary group.

When root unable to login into the system think:

Is password correct?

Is account expired?

Is terminal Blocked?

Do these Steps:

Boot the System on Single user mode.

Change the password

Check the account expire date by using chage –l root command.

If account is expired, set net expire date: chage –E “NEVER” root

Check the file /etc/securettyWhich file blocked to root login from certain terminal.

If terminal is deleted or commented write new or uncomment.

Reboot the system and login as a root.

Do the following steps as:

vi /etc/resolv.conf

nameserver 172.24.254.254

host server1.example.com

On every clients, DNS server is specified in /etc/resolv.conf. When you request by name it tries to resolve from DNS server.

Do the following steps as:

Use fdisk /dev/hdaTo create new partition.

Type nFor New partitions

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name.

Press w to write on partitions table.

Either Reboot or use partprobe command.

Use mkfs –t ext3 /dev/hda?

Or

mke2fs –j /dev/hda? To create ext3 filesystem.

vi /etc/fstab

Write:

/dev/hda?/dataext3defaults0 0

Verify by mounting on current Sessions also:

mount /dev/hda? /data

You should know about the /etc/inittab file, where default runlevel will define. And Much more runlevel specific Scripts are called here.

Actually that problem will occur if you don’t specify the default runlevel.

Reboot the system

Boot the System on single user mode.

Except for a normal boot of Linux, single-user mode is the most commonly used option. This is the system maintenance mode for experienced Linux administrators. It allows you to perform clean backups and restores to any partitions as needed from local hardware. It also allows you to run administration commands, recover or repair password and shadow password files, run filesystem checks, and so forth.

vi /etc/inittab and Write

id:runlevel:initdefault:

Standard Runlevels in RedHat Enterprise Linux

Runlevel

Description

0

Halt

1

Single-user mode, for maintenance (backups/restores) and repairs

2

Multiuser, without networking

3

Multiuser, with networking

4

Unused

5

X11, defaults to a GUI login screen. Logins bring the user to a GUI desktop.

6

Reboot (never set initdefault in /etc/inittab to this value!)

Do the following steps as:

1.vi /etc/sysconfig/network

GATEWAY=192.168.0.254

OR

vi /etc/sysconf/network-scripts/ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

ONBOOT=yes

IPADDR=192.168.0.?

NETMASK=255.255.255.0

GATEWAY=192.168.0.254

2.service network restart

This is boot related problem. There will be same questions repeated two times but problem is different.

First When you restart the system you will get the Error:

File Not Found

mount: error 15 mounting ext3

mount: error 2 mounting none

switchroot: mount failed: 22

umount /initrd/dev/: 2

Kernel Panic: no syncing: Attempted to kill init !

This error occurred in your system before showing welcome redhat linux. That means problem in grub boot loader.

Restart the System

Check the grub boot loader configuration by pressing e shortcut key.

You will see like:

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root= / rhgb quiet

initrd /initrd-2.6.9-5.EL.img

OR

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/root rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Then Edit Boot loader to make like

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Check all lines and edit as same as above. Press b to boot the system

After booting the system you should correct the /etc/grub.conf file.

If still you are getting Error likeFile not found, it seems that either kernel file or initrd file is missing. To troubleshoot with these problem, boot the system on rescue mode.

linux rescue

chroot /mnt/sysimage

Check the files on /boot, if not available install the kernel package from ftp or nfs server

Create the initrd image file on boot using: mkinitrd initrd-2.6.9-5.EL.img `uname –r`

To understand the role of a boot loader, take a step back from Linux. When you boot your computer, the BIOS starts by detecting basic hardware, including your hard drives. Once it's done, it looks for the boot loader on the Master Boot Record of the first available disk. If you're working with an older PC, the BIOS can't find your boot loader unless it's located within the first 1,024 cylinders of the hard disk.

Newer BIOSes overcome this problem with Logical Block Addressing, which is also known as LBA mode. LBA mode reads 'logical' values for the cylinder, head, and sector, which allows the BIOS to 'see' a larger disk drive.

If you have multiple hard drives, there is one more caveat. If your drives are IDE hard drives, the /boot directory must be on a hard drive attached to the primary IDE controller. If your drives are all SCSI hard drives, the /boot directory must be located on a hard drive with SCSI ID 0 or ID 1. If you have a mix of hard drives, the /boot directory must be located on either the first IDE drive or a SCSI drive with ID 0. In other words, this is not an issue on the Red Hat exams unless the computer that you're tested on has more than two hard drives. And I believe that's less likely, as that would increase the cost of the exam.

If you are getting the Kernel panic error, it means it is boot loader related problem. Redhat Enterprise Linux uses the GRUB boot loader. You can pass the kernel parameter from the boot loader as well as you can correct the kernel parameter passing from boot loader from GRUB screen at boot time.

GRUB boot loader configuration file is: /etc/grub.conf

And Correct Configuration is:

default=0

timeout=5

splashimage=(hd0,0)/grub/splash.xpm.gz

hiddenmenu

title Red Hat Enterprise Linux ES (2.6.9-5.EL)

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Probably miss-configured the boot loader, so giving this problem. You can pass the correct parameter from GRUB prompt:

Table 3-3:GRUB Editing Commands

Command

Description

b

Boot the currently listed operating system

d

Delete the current line

e

Edit the current line

o

Create an empty line underneath the current line

O

Create an empty line above the current line

If you know all parameters and sequence of the boot loader you can enter in command prompt also.

Press c on GRUB screen.

Grub>root (hd0,0)

grub>kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

grub>initrd /initrd-2.6.9-5.EL.img

grub>boot

By Default system accept the logs only generated from local host. To accept the Log from other host configure:

vi /etc/sysconfig/syslog

SYSLOGD_OPTIONS="-m 0 -r"

Where

-m 0 disables 'MARK' messages.

-r enables logging from remote machines

-x disables DNS lookups on messages recieved with -r

service syslog restart

This is boot related problem. There will be same questions repeated two times but problem is different.

First When you restart the system you will get the Error:

mount: error 15 mounting ext3

mount: error 2 mounting none

switchroot: mount failed: 22

umount /initrd/dev/: 2

Kernel Panic: no syncing: Attempted to kill init !

This error occurred in your system before showing welcome redhat linux. That means problem in grub boot loader.

Restart the System

Check the grub boot loader configuration by pressing e shortcut key.

You will see like:

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root= / rhgb quiet

initrd /initrd-2.6.9-5.EL.img

OR

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/root rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Then Edit Boot loader to make like

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Check all lines and edit as same as above. Press b to boot the system

After booting the system you should correct the /etc/grub.conf file.

Do the following steps as:

1. Insert the CD on CD-ROM and start the system.

2. In Boot: Prompt typelinux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 172.24.254.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10.Create the two RAID partitions having equal size of remaining all free space.

11.Click on RAID button

12.Type mount point /data

13.Select RAID Level 0

14.Click on ok

15. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Base

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

1.dump -0u –f /tmp/back /dev/hda4

dump is the standard backup utility. According to the questions, fullback should take. –0 means fullback, -u means update the /etc/dumpdates which maintains the backup record and -f means filename. If you are directly taking backup into other device, you can specify the device name.

e dump -0u -f /dev/st0 /dev/hda4. Where hda4 is a separate partition mounted on /home.

Do the following steps as:

1.chmod g+s /storage

2.Verify using: ls -ld /storage

Permission should be like:

drwxrws--- 2 root sysusers 4096 Mar 16 18:08 /storage

If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory.

To set the SGID bit: chmod g+s directory

To Remove the SGID bit: chmod g-s directory

Do the following steps as:

1.chmod g+s /archive

2.Verify using: ls -ld /archive

Permission should be like:

drwxrws--- 2 root sysuser 4096 Mar 16 18:08 /archive

If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory.

To set the SGID bit: chmod g+s directory

To Remove the SGID bit: chmod g-s directory

Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 192.168.0.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Redhat Enterprise Linux 5 Supports the RAID LEVEL 0, RAID LEVEL 1, RAID LEVEL 5 and RAID LEVEL 6 at installation time. You can create it at installation time later no need to type lots of commands for RAID.

At Installation Time:

Create the partitions using diskdruid.

Create the Partitions having File system Type Software RAID.

Click on RAID button

Type the Mount Point

Select File system type

Select RAID Level

Select Partitions/disks as a member of RAID.

Click on ok

After Installation: We can create the RAID Device after Installation on command-line.

Create the Two partitions having equal size. (Specify the Size using Cylinder, find the remaining cylinder and divide by 2).

Change the Partition ID to fd (Linux raid Autodetect) by typing t.

Type wTo write on partitions table.

Use partprobe command to synchronic the partition table.

Use: mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/hda? /dev/hda?

Verify the RAID: mdadm --detail /dev/md0

mkfs -t ext3 /dev/md0

mount /dev/md0 /data

vi /etc/fstab

/dev/md0/dataext3defaults0 0

Verify mounting devices using mount command.

Do the following steps as:

1.Create a partition having size 5 GB and change the syste id ‘8e’.

2.use partprobe command

3.pvcreate /dev/hda9Suppose your partition number is hda9.

4.vgextend test0 /dev/hda9vgextend command add the physical disk on volume group.

5.lvextend –L+5120M /dev/test0/lvtestvolume

6.verify using lvdisplay /dev/test0/lvtestvolume.

When user creates the file/directory, user owner will be user itself and group owner will be the primary group of the user.

There is one Special Permission SGID , when you set the SGID bit on directory,When users creates the file/directory automatically owner group will be same as a parent.

chmod g+s /data

Verify using: ls -ld /data

You will get: drwxrws---

Do the following steps as:

1.usermod -G sysadmin john

2.usermod –G sysadmin jane

3.Verify by reading /etc/group file

Using usermod command we can make user belongs to different group. There are two types of group one primary and another is secondary. Primary group can be only one but user can belongs to more than one group as secondary.

usermod -g groupname usernameTo change the primary group of the user

usermod -G groupname usernameTo make user belongs to secondary group.