Winter Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: netbudy65

HPE6-A79 Aruba Certified Mobility Expert Written Exam Questions and Answers

Questions 4

Refer to the exhibit.

A 7008 Branch Office Controller (BOC) is deployed in a remote office behind a core router. This core does not support 802.1q encapsulation. The Mobility Controller (MC) is the gateway for two tunneling mode SSIDs, as shown in the exhibit.

Which two different configuration options ensure that wireless users are able to reach the branch network through the router? (Choose two.)

Options:

A.

Configure all ports of the BOC as access ports on the controller VLAN, and change the gateway of clients to the core router IP.

B.

Configure the uplink of the BOC as an access port on the controller VLAN, and add static routes in the router for the SSID VLAN subnets.

C.

Configure the uplink of the BOC as a trunk port that permits the controller and the SSID VLANs. The controller VLAN must be native.

D.

Configure the uplink of the BOC as an access port on the controller VLAN, and enable NAT for the SSID VLANs.

E.

Configure the uplink of the BOC as a trunk port, tagging the controller and the SSOD VLANs, and enable NAT for the SSID VLANs.

Buy Now
Questions 5

An Aruba Mobility Master (MM) - Mobility Controller (MC) solution is connected to a wired network that is ready to prioritize DSCP marked traffic. A group of WMM-enabled clients sends traffic marked at L2 only.

What must the network administrator do to map those markings to DSCP equivalent values when traffic is received by the APs?

Options:

A.

Enable WMM in the SSID profile.

B.

Enable WMM in the VAP profile.

C.

Enable Skype4Business ALG Support.

D.

Enable traffic to be marked with session ACLs.

Buy Now
Questions 6

Refer to the exhibit.

A network administrator adds a Mobility Controller (MC) in the /mm level and notices that the device does not show up in the managed networks hierarchy. The network administrator accesses the CLI. executes the show switches command, and obtains the output shown in the exhibit.

What is the reason that the MC does not appear as a managed device in the hierarchy?

Options:

A.

The network administrator added the device using the wrong Pre-Shared Key (PSK).

B.

The network administrator has not moved the device into a group yet.

C.

The digital certificate of the MC is not trusted by the MM.

D.

The IP address of the MC does not match the one that was defined in the MM.

Buy Now
Questions 7

An organization owns a fully functional multi-controller Aruba network with a Virtual Mobility Master (VMM) in VLAN20. They have asked a network consultant to deploy a redundant MM on a different server. The solution must offer the lowest convergence time and require no human interaction in case of failure.

The servers host other virtual machines and are connected to different switches that implement ACLs to protect them. The organization grants the network consultant access to the servers only, and appoints a network administrator to assist with the deployment.

What must the network administrator do so the network consultant can successfully deploy the solution? (Choose two.)

Options:

A.

Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another IP address for its gateway.

B.

B. Allocate VLAN20 to the second server, and permit routing between them, then reserve one IP address for the second MM and another IP address for its gateway.

C.

Configure an ACL entry that permits IP protocol 50, UDP port 500, and multicast IP 224.0.0.18.

D.

Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another for the VIP.

E.

Configure an ACL entry that permits UDP 500, TCP 4500, and multicast IP 224.0.0.5.

Buy Now
Questions 8

Refer to the exhibit:

A company acquires ten barcode scanners to run inventory tasks. These WiFi devices support WPA2-PSK security only. The network administrator deploys a WLAN named scanners using the configuration shown in the exhibit.

What must the network administrator do next to ensure that the scanner devices successfully connect to their SSID?

Options:

A.

Set internal as the MAC authentication server group.

B.

Add scanner MAC addresses in user derivation rules.

C.

Enable L2 Authentication Fail Through.

D.

Add scanner MAC addresses in the internal database.

Buy Now
Exam Code: HPE6-A79
Exam Name: Aruba Certified Mobility Expert Written Exam
Last Update: Dec 3, 2024
Questions: 55

PDF + Testing Engine

$134.99

Testing Engine

$99.99

PDF (Q&A)

$84.99