Dumpsbuddy logo
When an AOS-CX switch uses a temporary copy of the Configuration State database, what kind of analysis does NetEdit perform to ensure that the configuration is correct?
Examine the following AOS-CX switch configuration:
Which access control entries would allow web traffic to the web servers 10.1.0.100 and 10.1.1.100?
Examine the network topology.
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area
Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
An administrator wants to leverage the Network Analysis Engine (NAE) feature on AOS-CX switches to perform rootcause analysis and to assist in quicklyidentifying problems. Which two AOS-CX databases does the administrator have access to when implementing scripts? (Select two.)
An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities. The campus involves a core, as well as multiple access layers. Which feature should the
administrator implement to allow both VSX-capable core switches to process traffic sent to the default gateway in the campus VLANs?
An administrator is designing an access layer solution in a data center. A key requirement is to dual-home mission-critical server connections to two different switches, ensuring that the servers always have network access, even during switch software upgrades. This feature should support strictly-controlled provisioning.
What would best meet the administrator's needs when deploying AOS-CX switches?
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the
two specified servers?
A switch will apply a device profile to a port based on which pieces of information? (Select two.)
In AOS-CX switching, what determines when a frame is forwarded by the switch between the ingress and the egress port?
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass
servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
Examine the configuration of Core-1 and Core-2. AOS-CX switches configured as a VSX stack:
Core1: Interlace lag 256
no shutdown
no routing
vlan trunk allowed all
lacp mode active Interface 1/1/46
no shutdown
lag 256 Interface 1/1/47
no shutdown
lag 256
VSX
Inter-switch-link lag 256
vsx-sync vsx-global
exit
Cofe2: interlace lag 250
no shutdown
no routing
vlan trunk allowed all
lacp mode active
Interlace 1/1/46
no shutdown
lag 256 Interface 1/1/47
no shutdown
lag 256 vsx
inter-switch-link lag 256
exit
When using the "show vsx status" command, the two switches fall to connect and successfully synchronize. What should the administrator do to fix this issue?
An administrate is managing a VSX pair of AOS-CX switches. The administrator configures the following on the secondary switch:
secondary (config)# vlan 100
secondary (conflg. vlan-100) # description BBB
Currently VLAN 100 does not exist on the primary switch. The administrator then accesses the primary switch and configures the following:
Primary(config) vlan 100 primary(config-v1an-100) # description AAA
What Is correct regarding the results of this configuration?
Examine the network topology.
Company XYZ has two connections to a service provider (ISP1). Here is the configuration of Router1:
Here is the configuration of Router2:
Based on configuration of Router1 and Router2, which BGP metric is being manipulated?
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
How should a network administrator add NAE scripts and implement NAE agents that will run on an AOS-CX switch?
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is
concerned that when OSPF network changes occur, the aggregation switches will respond to the changes
slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
An administrator in a company of 349 users has a pair of AOS-CX switches with connections to external
networks. Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?
A network administrator is implementing BGP for a larger network. The network has over 20 exit points across 15 different BGP routers. The administrator does not want to implement a fully-meshed iBGP peering between all BGP routers.
Which feature should the administrator implement to reduce the number of peers the administrator needs to define?
What is the purpose of the transit VLAN when implementing dynamic segmentation policies involving AOS-CX switches and an Aruba gateway solution?
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time. The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
A customer has twenty AOS-CX switches that will be managed by NetEdit and would like support for NetEdit these switches will exist in the network for at least five years.
Which type of licensing should be used by this customer?
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
An administrator creates an ACL rule with both the “count” and “log” option enabled. What is correct about the
action taken by an AOS-CX switch when there is a match on this rule?
An administrator is configuring BGP and has two connections to a service provider to two different local routers.
Which BGP metric should the administrator configure to influence which local router the service provider will use to reach certain routes?
A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of thirdparty VoIP phones are showing up in the NetEdit topology. The engineer deletes these, but they are
automatically rediscovered by NetEdit and added back in.
What should the administrator do to solve this problem?
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
TESTED 21 Nov 2024
