Dumpsbuddy logo
Which of the following statements regarding the BFD one-arm-Echo function are true?
mm en
Router HW1 functions as an MPLS LSR router on the carrier's network. The router receives a labelled packet, but the label entry does not exist in the router's LFIB. Given this information, how will the router process the packet?
If host HW1 on the network wants to join a video conference, what will the host do?
The router acts as the HW1 MPLS LSR HW, and the router exists in the network of the carrier. The router receives a message with the tag.
The item does not exist in its LFIB ? Then how does the router manage the text?
By showing the command as shown below, it can be judged that the fault of the delivery machine is the replacement ring.
OSPFv3 OSPFv2 OSPFv3 protocol Single-issue protocol is a separate one. It differs from the other in terms of road-based rather than network segment chain.
The next thing is to say the mistake ?
About the sliding window TCP ( ) action, which of the following description is the error? Multiple selection
Community-filter: There are two types of primitive attribute and high-level attribute group filter group filtering. Which of the following tools enables high-level attribute filtering?
Is it more flexible than the basic Hugh attribute?
The RD VPN IP RD bit is used to distinguish the same address in different. How much is included?
Compared with IGMPv1 IGMPv2 ( ), what changes have been made? Multiple selection
As shown in the figure, there are two diagrams. IPv6 IPv4 IPv6 IPSEC network can access the network, and the same two time networks need to establish inter-network tunnel communication.
Which of the following packaging modes is sufficient for the above requirements?
As shown in the figure, the branches and branches use the redundant path to establish the total chain IPSEC VPN Router_B 1 URPF , and the traffic from the branch pair is on at the same time.
Which of the following are correct options? ( ) Multiple choices
When the router is running on the same OSPFv3 ISIS OSPFv3 ISIS and the routes that need to be imported, the following types of import configurations are correct.
selected)
As shown in the following topology, establish a phase relationship, and receive the AS400 AS100 1.1.1.1/32 AS-Path routing network. What is the attribute?
ISIS P2P, LSP, PSNP, LSDB protocol in the broadcast network and the network. When the router receives it, it needs to use the line to ensure the synchronization.
A company's second network architecture, such as a layer map, when the project configuration is completed, the communicator can't find the business door, and the command looks like the following to check the device status.
Possible reasons are as follows
(No texture, anyway, the three elements are not consistent with the MSTP Master sample project.)
When the DLDP DLDP Disable Trap fiber-optic single-chain exists in the optical path, the default operation includes the Huawei device recognizes that the state is migrated to the state; the outgoing message
Information; since the interface is blocked, it is set to state.
Routers and routers are running. Both routers are in R1 R2 BGP AS 65234 R2 R1 BGP. The router's route exists on the router's path.
By the table, but not in the router's routing table. R1 IP
So what caused the problem?
In the process of using LACP, ? (the agreement is as follows, the correct one is multiple choice
The operation of the two routers is BGP 4+ BGP, which is in the normal neighbor relationship, but the routing table of the local router does not have a neighboring routing entry.
Because it is:
Manage some routing managers on the desired routers, and then mark which of the following tools can be routed out to facilitate management of the configurator
Strategy?
If the network is running OSPF, the OSPP Totally Stub Totally Stub ls-id configures the non-backbone area in the area as the area under the strip.
0.0.0.0 LSA, LSA LSA?
About the basic procedure MPLS, ? Forwarded the following description is the error
After IS-IS area authentication is configured, which of the following ISIS packets will carry authentication information?
Which of the following statements regarding 802.1X authentication, RADIUS authentication, and HWTACACS authentication are true?
In a data communication session between two hosts, the session layer in the OSI model generally communicates with what other layer of the OSI model?
Based on the key configurations, as shown in the figure, R1 and R2 establish a Level-2 neighbor relationship. Which of the following statements regarding routing entries on R2 are true?
Which of the following AS-paths can be matched by the AS-Path filter configured using the ip as-path-filter 1 permit ^12.*74$ command?
Huawei switches SWA and SWB are connected through seven physical Ethernet links and are configured with static link aggregation. On SWA, the interface and are configured in the following sequence: Ethernet 1/0/1, Ethernet 1/0/2, Ethernet 1/0/3, Ethernet 1/0/4, Ethernet 1/0/5, Ethernet 1/0/6,
Ethernet 1/0/7. If only six ports are supported in a LAG on SWA and SWB, which of the following statements is true?
A network with the typology shown in the figure below is set up in a lab. On the network, SW1 uses the default configurations, and STP disables on SW2. Given this information, which of the following statements is true?
Network administrators can use CAR technology in traffic policing.
Which of the following technologies can be applied in CAR?
Which of the following statements regarding optimal route selection of various protocols is true?
OSPF is running on a network. In OSPF, what LSA type would only cause an Incremental SPF calculation? (Multiple Choice)
In a BGP EVPN distributed gateway scenario, which of the following packet types is required to implement VM migration?
Which of the following statements is true about the port mirroring on Huawei devices?
An OSPF router is connected to Area 0 and Area 1, and Area 1 is configured as a stub area.
Which type of LSAs are in Area 1?
Routers R1 and R2 are configured for BGP. Both routers are in AS 65234. Routes from Router R2 are in the BGP table on Router R1, but not in the IP routing table. What could be the cause of this problem?
Which parameter will not be received from the root bridge by a non-root bridge running 802.1D STP?
If P1M-SM is enabled on a multicast network, an RP needs to be configured. The RP can be configured the following statements regarding RP configuration is true?
BGP can automatically summarize only routes with the Origin attribute being Incomplete.
By default, WRED is configured on a newly deployed Huawei router. Which of following statements regarding WRED are true?
Which of the following command outputs indicates that a loop has occurred on a switch?
A)
B)
C)
D)
Which messages are sent to the agent by the network management station (NMS) SNMPv1?
How long will a Huawei switch running RSTP wait before aging out the BPDUs on an interface?
The function mpls isp command is run on a router to check LSP information. The command output is as follows;
Which of the following statements is true?
A network administrator is planning to use an automatic 6to4 tunnel to transmit IPv6 data on an IPv4 network. If the IPv4 address of the router interface is 138.14.85.210, the corresponding tunnel address should be 2001:8a0e:55d2:l:230:65ff:fe2c:9a6.
The following descriptions about the PPP CHAP ?( ) protocol authentication function are correct.
TESTED 31 Dec 2024
