After setting up the VoIP configuration, a network administrator issues the following commands with the results shown:
console# show voice vlan
Administrative Mode………………………Enable
console# show voice vlan it gi 1/0/2
Interface………………………………….Gi1/0/2
Voice VLAN Interface Mode……………Enabled
Voice VLAN ID…………………...…….10
Voice VLAN COS Overwrite……………False
Voice VLAN DSCP Value…………...….46
Voice VLAN Port Status……………...…Enabled
Voice VLAN Authentication………….…Disabled
Based on this information, what is the Layer 3 QoS value?
A customer is upgrading their campus network Access layer switches. They require 2-10GbE uplinks, 48- 1GbE ports with PoE, and stacking capability of up to 12 units.
Which Dell EMC N-Series model will meet the customer's requirements?
A switch interface has been properly configured for static port security with one defined allowable MAC address. However, when the network administrator plugs a switch into that port, multiple devices are still allowed access to the network.
Where must port security also be enabled to have an effect?
When configuring a Dell EMC N-Series switch for VoIP and QoS, what is one QoS setting that ensures voice traffic is prioritized in the presence of other network traffic?
Which port security method converts existing dynamically learned MAC addresses on an interface to this mode and not age out?