Winter Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: netbudy65

5V0-41.20 VMware SD-WAN Troubleshoot Questions and Answers

Questions 4

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot gel to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

A business policy is created and saved.

How can the network administrator verify the business policy is working?

Options:

A.

Select a VCE > Test & Troubleshoot > Remote diagnostics and select List Active flows and check the flows to see what Business policy is applied under the Business policy column.

B.

Executing Route table dump under VCE > Test St Troubleshoot > Remote Diagnostics and select Route Table dump and look for business policy applied in the Route table Dump stats.

C.

Check under Monitor > Applications tab and check the listing of applications at the bottom of the screen

and the category of the type of traffic there.

D.

Check under the Monitor > Business Priority tab for Business policy statistics.

Buy Now
Questions 5

Scenario 1:

A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of lime. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.

Exhibit.

When attempting to activate an Edge, after clicking on the "activation link" in the email that was sent to the network administrator, the Edge's local UI shows as "Internet down". This is preventing the Edge from coming online and being activated. When referring to the output, the network administrator notices that the Edge has received DHCP addressing.

What could be preventing the Edge from coming online?

Options:

A.

The next hop does not respond to ICMP pings.

B.

Cloud VPN is not enabled in the AMER Branch profile.

C.

The subnet mask assigned to the Edge is incorrect.

D.

The Edge's profile does not specify the correct Edge Model.

Buy Now
Questions 6

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY hub location.

The Checkpoint VNF and associated security services were successfully deployed at the London Branch. Users are now are complaining that Webpages are extremely slow to load, just like before.

What should the administrator do?

Options:

A.

Reboot the Edge, as this is a requirement in the deployment of a Security VNF.

B.

Disable and redeploy the VNF with lower memory requirements.

C.

Verify to see if a firewall rule in the Edge is set to allow traffic to the Checkpoint VNF.

D.

Check the flow records in Remote Diagnostics.

Buy Now
Questions 7

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.

What is a possible reason for this?

Options:

A.

Cloud VPN for the Edges / Profiles is not enabled.

B.

There is an invalid MTU configuration at Chicago.

C.

OSPF or BGP is not enabled.

D.

The routing table on the Edges has not been initialized.

Buy Now
Questions 8

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

Where can the network administrator check to see what routes are present on the London-site Edge?

Options:

A.

Log into the VCO > Configuration > Overlay Flow Control

B.

Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "List Paths"

C.

Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "Route Table Dump"

D.

Log into the VCO > Monitoring > Overlay Flow Control

Buy Now
Questions 9

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

Users at the Dallas Branch are complaining that downloads/uploads from Office365 are slow. Working in Teams has been providing slow responses. The Internet circuit is 100Mbps while the MPLS Circuit is 45Mbps. Upon troubleshooting, the network administrator has noticed the traffic is Backhauling through the Seattle hub for all internet traffic.

How should the network administrator resolve the issue?

Options:

A.

Leave the system as is, the gateways will resolve the issues after doing 15 minutes of link qualification.

B.

Advertise public routes to Office365 and Teams through the New York Hub.

C.

Leave the system as is, the hubs will auto-rebalance tunnels after doing 15 minutes of link qualification.

D.

Prevent the hub from advertising a default route.

Buy Now
Questions 10

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.

What should the network administrator look for next to determine what the issue might be?

Options:

A.

Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose's branch router.

B.

Check Test & Troubleshoot and review a route table dump of the NY hub site.

C.

Check the Global Segment Configuration to see if it has the Routing Flag enabled.

D.

Determine if OSPF has been configured on the MPLS Routers at the hub.

Buy Now
Exam Code: 5V0-41.20
Exam Name: VMware SD-WAN Troubleshoot
Last Update: Nov 21, 2024
Questions: 36

PDF + Testing Engine

$130

Testing Engine

$95

PDF (Q&A)

$80